That's just the winter in Canada! :)))cvrle59 wrote:4.07/4.10 are freezing my computer.
MQN
Re: MQN
I5 4440+TXCOmobo+JCAT Femto-Intona-JKRegen+HynesPS+TeraDak ATX-820W=JCATusb=DiverterHR=Wadia 931/922(GNSC mod)=PassLabsXA100.5=2xValhalla=Stacked&moded ESL57+JAS SuperTweet+2MJ Acoustics Ref.I
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
Re: MQN
Ken Moreland wrote:4.07 is very good and has no clicks before tracks. Will try 4.10 later.
KM
No clicks anymore on different set of tracks.
Prefer 4.07 to 4.10
HDPLEX;picoPSU;ASUS Q87M;i7-4770T;PH SR7EHD;Server2012R2;Thesycon 2.24;
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
JCAT USB;Sonicweld DiverterHR2;Naim DC1;Chord Hugo;Morrow Audio MA6;Naim NAC-282,SuperCapDR;NAP-300;
AQ Cinnamon;GISO GB;Netgear Pro+XM21X;Cisco SG300;NAS-ZFS.
-
- Posts: 97
- Joined: Fri Oct 11, 2013 4:22 pm
Re: MQN
Interesting thread in Computer Audiophile: http://www.computeraudiophile.com/f11-s ... ize-22985/.
Can anyone explain why files with tags sound different from files without?
Can anyone explain why files with tags sound different from files without?
SDTrans384 with 1X5V and 3x3.3V supplied by A123 batteries, Soekris DAM1021 Rev2 with +-12V and 3.3V supplied by A123 batteries, Salas hotrodded DCB1, LM3875 Gainclone and IPL Acoustics S2TLM transmission line speakers
Re: MQN
this is what I postedadolfo.a.aguiar wrote:Interesting thread in Computer Audiophile: http://www.computeraudiophile.com/f11-s ... ize-22985/.
Can anyone explain why files with tags sound different from files without?
"in my mucking about with loading wav files the sound can be different depending on the chunk size eg 4096 vs 8192 ie load the data in 4096 byte chunks, this equates to a standard page. A player reads the wav file and steps through it until it get's to the data section, so if the tags/metadata shift the start of data section then that could affect the sq because reading through a page boundary will produce noise.
also tags/notags might produce a different code path which could be enough to affect the sq.
what I do is read to the data start and then load that into page aligned ram in 4096 chunks and then pass that to an intermediate ram and then to the player ram. All without use of file/cpu or device cache.
haven't checked to see if flac to wav conversions sound the same."
Re: MQN
No mqnload, but same problem! Must be the Canadian freeze!cvrle59 wrote:I am wondering if anyone is using these newest versions with mqnload. Could that be the reason why I experience issues?
Didn't tried the 4.12 yet.
I5 4440+TXCOmobo+JCAT Femto-Intona-JKRegen+HynesPS+TeraDak ATX-820W=JCATusb=DiverterHR=Wadia 931/922(GNSC mod)=PassLabsXA100.5=2xValhalla=Stacked&moded ESL57+JAS SuperTweet+2MJ Acoustics Ref.I
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
4SteinHarmonizers;RR777;Tellus;StillpointsUltraSS
Re: MQN
maybe requires haswellsima66 wrote:No mqnload, but same problem! Must be the Canadian freeze!cvrle59 wrote:I am wondering if anyone is using these newest versions with mqnload. Could that be the reason why I experience issues?
Didn't tried the 4.12 yet.
Re: MQN
Christmas is over, I should've known that earlier...:(sbgk wrote:maybe requires haswellsima66 wrote:No mqnload, but same problem! Must be the Canadian freeze!cvrle59 wrote:I am wondering if anyone is using these newest versions with mqnload. Could that be the reason why I experience issues?
Didn't tried the 4.12 yet.
i3 Haswell, PPAStudio USB3 card and USB Micro cable/Chord Hugo/Nad-275BEE/Harbeth-30.1