Threshold 400a, Mytek Brooklyn Bridge, Ditton 66's

Post Reply
Terry
Posts: 234
Joined: Thu May 22, 2014 10:10 pm

Threshold 400a, Mytek Brooklyn Bridge, Ditton 66's

Post by Terry »

Hi all,

It's been a while and I hope this finds you all well. Last time on I mentioned acquiring a pair of venerable Celestion Ditton 66's. They needed some work - the cone on one mid needed attention and a general tidy up required with both cabinets. I'd been looking for a power amp to drive them as well as they need to be and eventually found a Threshold 400a from much the same period - mid to late '70's. The system is completed with a Mytek Brooklyn Bridge streamer amp - controlled with app/Tidal on iPad. Settling in just now and will report back when we've spent some time together! First impressions as Noel Cloney would say are "very good".

Terry
Attachments
system_3.jpg
system_3.jpg (46.07 KiB) Viewed 338 times
mytek_brooklyn_bridg_1.JPG
mytek_brooklyn_bridg_1.JPG (40.84 KiB) Viewed 338 times
threshold_400a_1.JPG
threshold_400a_1.JPG (40.1 KiB) Viewed 338 times
Last edited by Terry on Wed Oct 20, 2021 5:49 pm, edited 1 time in total.
System 1. LP12/Mose Hercules/Ittok LVII/ATOC9III, Dynavector P75 MkIII, Denon DCD-A100, iPad/AirPlay, Accuphase e303x, Gale gs401a.
System2. iMac/Tidal, iFI Dac, Dynavector L200 pre, Croft Iosis, Sonus Faber Auditor M.
User avatar
Fran
Site Admin
Posts: 4114
Joined: Sat Jan 16, 2010 10:03 pm

Re: Threshold 400a, Mytek Brooklyn Bridge, Ditton 66's

Post by Fran »

Ah, that's a lovely setup Terry.

Yes, that would be a nice pairing I'd say - plenty of welly too I'd imagine.
Do or do not, there is no try
giant haystacks
Posts: 136
Joined: Thu Jul 07, 2011 12:57 pm
Location: augher ,co. tyrone

Re: Threshold 400a, Mytek Brooklyn Bridge, Ditton 66's

Post by giant haystacks »

I have a friend in Monahan who has the monoblock version of your amp and recently got a set of Allison 1 speakers from England I have to go to hear lemmy in all his glory soon .the threshold were the fore runner of pass labs .well done
Terry
Posts: 234
Joined: Thu May 22, 2014 10:10 pm

Re: Threshold 400a, Mytek Brooklyn Bridge, Ditton 66's

Post by Terry »

Fran wrote: Tue Oct 19, 2021 7:29 pm Ah, that's a lovely setup Terry.

Yes, that would be a nice pairing I'd say - plenty of welly too I'd imagine.
Thanks Fran. Delighted with things so far and can't see that changing. The 400 has tremendous grip and with a damping factor of 100, easily controls the considerable bass real estate of the 66's (some 24" on each side) — fast, powerful, big-scaled, tight and tuneful. Handles all manner of material with ease. The unit is all-original and build quality is military grade. Seems it's the piece that got Nelson Pass a lot of notice... https://forum.audiogon.com/discussions/ ... -amplifier.

T
System 1. LP12/Mose Hercules/Ittok LVII/ATOC9III, Dynavector P75 MkIII, Denon DCD-A100, iPad/AirPlay, Accuphase e303x, Gale gs401a.
System2. iMac/Tidal, iFI Dac, Dynavector L200 pre, Croft Iosis, Sonus Faber Auditor M.
Terry
Posts: 234
Joined: Thu May 22, 2014 10:10 pm

Re: Threshold 400a, Mytek Brooklyn Bridge, Ditton 66's

Post by Terry »

giant haystacks wrote: Thu Oct 21, 2021 9:25 pm I have a friend in Monahan who has the monoblock version of your amp and recently got a set of Allison 1 speakers from England I have to go to hear lemmy in all his glory soon .the threshold were the fore runner of pass labs .well done
Thanks GH. It’s probably a pair of Threshold Stasis SA1 or 2’s your friend is running…serious welly. A pair of welly’s even. Those Allison’s may be a tad too polite for Lemmy tho. Interested to hear. T
System 1. LP12/Mose Hercules/Ittok LVII/ATOC9III, Dynavector P75 MkIII, Denon DCD-A100, iPad/AirPlay, Accuphase e303x, Gale gs401a.
System2. iMac/Tidal, iFI Dac, Dynavector L200 pre, Croft Iosis, Sonus Faber Auditor M.
Post Reply