Just ordered one Nige, the final frontier for me after lots of messing with Amanero, reclocking, clocks, etc.
I expect Amanero should be reacting to all this and would expect to see something new from them soon, will ask Lukasz if he knows of any new developments.
Sligolad wrote:Just ordered one Nige, the final frontier for me after lots of messing with Amanero, reclocking, clocks, etc.
I expect Amanero should be reacting to all this and would expect to see something new from them soon, will ask Lukasz if he knows of any new developments.
im sure there still will be plenty of messing ive already decided to leave the reclocking flipflop in the chain
and im sure the regens and intonas will have their input too
sere just starting at a higher level
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
Does bring any improvement to the boards like Soekris that have their own reclocking: FPGA and/or flipflops?
ASUS-H81i Plus, i3 4360, 8GB RAM, Linear PSU. USB/PCI PPA Studio V2.
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
Does bring any improvement to the boards like Soekris that have their own reclocking: FPGA and/or flipflops?
yes its on a soekris atm with a reclocking flipflop before the i2s goes into the soekris then bypassing the isolators
ill be putting a usb2412 chip on the front of it too soon
this is the pic of initial testing
whenever we get the perfect source upstream wont matter :)
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's
This blue board has possibility to remove ferrite beads and power clock with external 3.3V. Have you tried that? If so does it brings any improvement?
Does the bypassing Soekris isolators brings SQ improvment?
ASUS-H81i Plus, i3 4360, 8GB RAM, Linear PSU. USB/PCI PPA Studio V2.
Ubuntu Live USB in RAM
Soekris R2R Salas Ref D powered -> Modulus 86 -> MA Silver 8
This blue board has possibility to remove ferrite beads and power clock with external 3.3V. Have you tried that? If so does it brings any improvement?
no havent got that far yet hadnt even noticed the ferrite beads the system clock is lower voltage maybe 1.6 or so but ive used a resistor divider sucessfully before as power
Yes with lifepo4 id be confident it will make a noticeable improvement
Does the bypassing Soekris isolators brings SQ improvment?
Dangerous question
If youve got good noise control yes but id keep it well down on the list of things to do
sd card player, modded soekris dac, class a lifepo4 amp or gb class a/b amp, diy open baffle speakers based on project audio mundorf trio 10's